Planning for system

Due to the large scale of the solid parking system, the system shall usually be set up enclosed or semi-enclosed, to secure the safety of people, car, and the system, and organized management. If the system is constructed underground, a parking room shall be built on ground with a garage door. In addition, the topographic condition, access position, fire-protection, ventilation, drainage, lighting and other factors and requirements shall be taken into account in planning.

Operating principle

The multiple-floor plane moving parking system is combined by steel framework structure, elevator, longitudinal guide rail, handling trolley, parking and pick-up equipment, safety detecting device, and electric control system. If you want to park your car, just drive into the elevator of the parking room, and when you get out of the parking room, the system starts running. Firstly, the elevator sends your car with loading board underneath to the target floor vertically, and the handling trolley goes to the right position longitudinally at the same time; secondly, your car will be moved from the elevator to the handling trolley through the transvers parking and pick-up equipment in it, and moved to the front of the target place; at the last, the handling trolley shall send your car with the loading board to the right place. And it reverses if you want to pick up your car.

Features of the system

Making full advantage of space and saving land resources, this system can be made with multiple floors.

With large capacity, the system can hold 180 cars at the most.

High efficient and energy-saving, the carrier(trolley) of each floor operates separately.

Simple structure, this system is combined with elevator, carrier(trolley), turning device, loading board and framework structure, and could be assembled flexibly like building blocks..

Complete automatic control, this system is based on large PLC control, and adopts wireless Bluetooth communication technology.

Non-impact during start and stop, the four main mechanisms of lifting, longitudinal and transvers moving, and turning device adopt variable-frequency speed-regulating technology.

High-speed operation, a top speed of 120m/min for elevator, and 300m/min for carrier.

User-friendly operation, an interface with touch screen, swiping card and remote control.

Possession of completed measuring and protection system, to secure safety of people, car, and the system.